Multi-function sewing machine using an old sewing machine and points are very different, there is a need for beginners with the machine running process. According to reports, the beginning of the use of the sewing machine and sew a straight line from the threading start practicing, experience foot pedal speed and coordination. Skilled straight after exercise bent pin, sew the pattern, and finally the catcher. If you attempt a high degree of difficulty up operation, it is prone to needle, is broken.

Routine maintenance of the machine should not be ignored. Correct use is well maintained. Secondly, when the presser foot down, needles do not go empty. In addition, usually to clean up the bottom hook position, the dirt on the machine wear big, clean up after a couple of drops of oil to maintain lubrication should also regularly head to the shank portion within the fuel.

Can be detected in the course of their usual jumpers often, needle and other problems, small problems can be solved completely their own.

Jumper: First of all, due to improper use can cause the needle to bend the jumper, then switch the needle on it; the needle bar dislocation shift may also lead to a jumper, the best professional service; sewing elastic fabric may also cause jumper, then change special flexible wire, or covered with a layer of fabric at the newspaper, sewing will be torn newspaper.

Needle: exchange flowers will swing clockwise, if the needle is not lifted at this time and on the cloth, it is likely to cause the needle to break, break. If the needle of inferior quality will needle, can directly replace.

Wrapped line: This is due to too much slack caused. First on the line should be used to adjust the knob to tighten the line, you should also check stringing lines are not entered in the sheet gripper.